CA CHOKE VALVE SERIES
TECHNICAL DATA SHEET FOR MAXIMUM TRIM SIZE OF 2.22”

CA CHOKE VALVE SERIES

TECHNICAL DATA SHEET FOR MAXIMUM TRIM SIZE OF 2.22”

The ‘CA’ product family of production choke valves utilizes a 0.75” To 2.22” body orifice and offers the ability to manually or remotely control well production flow at the wellhead and or flowline with a more conventional type choke body. The cage & plug flow trim is pressure balanced to minimize the stem loads and provide low operating torques. Standard end connections range in size from 2” to 6”.

Download pdf
Alternate Text
Design CAGE & PLUG TRIM
TRIM SIZE: 0.75” 1.18” 1.75” 2.22”
CV: 11.2 28.2 67.4 103.38
MAX BEAN SIZE: 48/64” 76/64” 112/64” 142/64”
END CONNECTION: CUSTOMER SPECIFIED
VALVE MODEL CA
BODY TYPE Right Angle
BODY SIZE Suitable for max. 2.22” orifice
BODY RATING 15,000 psi (max.), Limited by the rating of the body end connection.
INLET CONNECTION See ‘End Connection’ table below
OUTLET CONNECTION See ‘End Connection’ table below
BONNET TYPE Lancaster Proprietary Bonnet
BODY / BONNET MATERIAL See ‘Material Options’ table below
STEM MATERIAL See ‘Material Options’ table below
SEAL MATERIAL See ‘Material Options’ table below
TRIM STYLE Equal Percentage Cage and Plug or Needle
BALANCED / UNBALANCED Balanced
FLOW CHARACTERISTIC Equal Percentage or Linear
TRIM MATERIAL See ‘Trim Options’ table below
DESIGN CV See the table above
LEAKAGE CLASSIFICATION ANSI/FCI 70-2 Class IV (Standard)
API SPEC. 6A MATERIAL CLASS DESIGNATIONS
Temperature Class Certification Level Material Class Designations
AA BB CC DD EE FF HH
P-U
-20F to 250F
-29C to 82C
STD/PSL-1 BB BB FF EE EE FF HH
PSL-2 EE EE FF EE EE FF HH
PSL-3 EE EE FF EE EE FF HH
L-U
-50F to 250F
-46C to 121C
STD/PSL-1 EE EE FF EE EE FF HH
PSL-2 EE EE FF EE EE FF HH
PSL-3 EE EE FF EE EE FF HH

NOTES: other temperature classes are available upon request

BB-GENERAL SERVICE EE-SOUR SERVICE FF-SOUR SERVICE HH-SOUR SERVICE
RECOMMENDED SERVICE General Oil,
Corrosive (CO2)
Sour (H2S)
Low Corrosive (CO2)
Sour (H2S)
Corrosive (CO2)
High Sour (H2S)
High Corrosive (CO2)
BODY Carbon Steel (60K)
Low Alloy Steel (75K)
Carbon Steel (60K)
Low Alloy Steel (75K)
Carbon Steel (60K)
Low Alloy Steel (75K)
Clad Low Alloy Steel
Corrosion Resistant Alloy
BONNET Carbon Steel (60K)
Low Alloy Steel (75K)
Stainless Steel (75K)
Carbon Steel (60K)
Low Alloy Steel (75K)
Stainless Steel (75K)
Carbon Steel (60K)
Low Alloy Steel (75K)
Stainless Steel (75K)
Clad Low Alloy Steel
Corrosion Resistant Alloy
STEM AISI 17-4PH
Low Alloy Steel
AISI 17-4PH
Low Alloy Steel
Inconel 625 or
Inconel 718
Inconel 625 or
Inconel 718
PLUG/CAGE ASSEMBLY AISI 17-4PH
Low Alloy Steel w/TCC
AISI 17-4PH
Low Alloy Steel w/TCC
Inconel 718 w/ TCC Inconel 718 w/ TCC
SEALS PTFE/PEEK PTFE/PEEK PTFE/PEEK PTFE/PEEK

NOTE: The materials supplied may change based on the customers NACE service designation (i.e.- “x.xx- NL”)

Connection Size Working Pressure psig Dim. Ref. A Outlet B Inlet C Manual Operator D Mounting Flange
2.00” (50.8) Nom. Orifice (Adj.-Pos., multiple orifice sizes available), Max CV = 103.38
3” NPS, RF ANSI 600 LB. 8.00 (203) 8.00 (203) 20.03
(516.89)
18.81
(477.77)
4” NPS, RF ANSI 600 LB. 8.75 (2.22) 8.75 (2.22)
6” NPS, RF ANSI 600 LB. 12.38 (314) 12.38 (314)
3” NPS, RF ANSI 900 LB. 8.75 (222) 8.75 (222)
4” NPS, RF ANSI 900 LB. 9.25 (235) 9.25 (235)
6” NPS, RF ANSI 900 LB. 13.25 (337) 13.25 (337)
3” NPS, RTJ ANSI 900 LB. 8.81 (224) 8.81 (224)
4” NPS, RTJ ANSI 900 LB. 9.31 (237) 9.31 (237)
6” NPS, RTJ ANSI 900 LB. 13.31 (338) 13.31 (338)
3” NPS, RF ANSI 1500 LB. 9.38 (238) 9.38 (238)
4” NPS, RF ANSI 1500 LB. 9.62 (244) 9.62 (244)
6” NPS, RF ANSI 1500 LB. 14.50 (368) 14.50 (368)
3” NPS, RTJ ANSI 1500 LB. 9.44 (240) 9.44 (240)
4” NPS, RTJ ANSI 1500 LB. 9.69 (246) 9.69 (246)
6” NPS, RTJ ANSI 1500 LB. 14.62 (371) 14.62 (371)
3” NPS, RTJ ANSI 2500 LB. 11.50 (292) 11.50 (292)
4” NPS, RTJ ANSI 2500 LB. 12.44 (316) 12.44 (316)
Connection Size Working Pressure psig Dim. Ref. A Outlet B Inlet C Manual Operator D Mounting Flange
2-1/16” (52.39) API 5,000 7.86 (227) 11.46 (291) 20.35
(516.89)
18.81
(477.77)
2-9/16” (65.09) API 5,000 8.88 (225) 11.75 (298)
3-1/8” (79.38) API 5,000 8.88 (225) 11.38 (289)
4-1/16” (103.19) API 5,000 10.12 (257) 12.64 (321)
2-1/16” (52.39) API 10,000 10.38 (264) 12.01 (305)
2-9/16” (65.09) API 10,000 10.38 (264) 11.76 (299)
3-1/16” (77.79) API 10,000 10.38 (264) 10.38 (264)
4-1/16” (103.19) API 10,000 9.92 (252) 11.50 (292)
2-1/16” (52.39) API 15,000 8.86 (225) 10.32 (262)
2-9/16” (65.09) API 15,000 11.51 (267) 11.75 (298)
3-1/16” (77.79) API 15,000 10.35 (263) 11.61 (295)
4-1/16” (103.19) API 15,000 9.92 (252) 11.50 (292)

* “C” and “D” shown with 3” x 2” reduced orifice trim
1. Using our 24vDC actuator shown, “E” is 11.97”; Pneumatic & Hydraulic units are also available as well as other
Electric units
2. For sizes or dimensions not shown, for ANSI flanges or hub connections, contact sales or engineering
3. In addition to “C”, provide clearance for bonnet and trim removal as follows (worse case – with trim in fully
closed position): 1.0” (25.4) Nominal, add 7.81” (198.37) for needle trim; add 6.75” (171.45) for cage trim
4. (xxx.xx) dimensions shown in parenthesis are in millimeters (mm)
5. Orifices in X/64ths are openings with the equivalent area of a circle with the diameter of X/64ths of an inch;
64/64ths = 1.00”
6. API 5,000 psig is equal to 34.473 MPa; 10,000 psig = 68.946 MPa; 15,000 psig = 103.420 MPa; 20,000 psig =
137.893 MPa.
7. Dimensions shown above are subject to change without notice. Other dimensions are available, please consult
the Lancaster engineering department.

Alternate Text

Contact us

At Lancaster Flow Automation, we’re always available to discuss your production needs. Please don't hesitate to get in touch.
[contact-form-7 id="30" title="Footer contact form" html_class="contact_form"]